Steam-A-Seam 2Ⓡ
Double Stick Fusible Web

Get Stuck on Fabric Fusing!

 

The #1 most loved brand of double stick fusible web, Steam-A-Seam 2 makes appliqué easy and fun!! Steam-A-Seam 2 is a heat activated pressure sensitive fusible webs. This makes the web tacky and repositionable for easy placement of your appliqué giving you the ability to position and reposition your design before permanently ironing.

You’ll never make a mistake – the last step is to fuse when everything is perfectly in its place! Before fusing, tack your project to a wall or try on a garment to check appliqué placement; you’re able to reposition pieces while you’re wearing them.

View or download step by step instructions here: SAS2 – LSAS2 Instruction Sheet

Available By The Bolt:
12″ x 40 YD | 18″ x 25 YD | 24″ x 25 YD
Available In 3 Yard Boxes:
12″, 18″ & 24″ x 3 YD Packs 12 per case
Tapes: 1/4″ x 40 YD – 12 per case | 1/2″ x 20 YD per case
Sheets: 9” x 12” – 5 Sheets per pack – 24 packs per case

Benefits of Using Steam-A-Seam®:

  • Repositionable stick
  • Bond is strong & permanent
  • Leave edges unfinished – will not fray or lift
  • Will not gum up your needle
  • Machine wash and dry (See Product Care)
  • So Easy to Use and introducing New Benefits:
  • New grid paper aids in tracing
  • Easy to see through and write on
  • Now printer friendly!

Use Steam-A-Seam 2 with different materials & projects:

  • Appliqué
  • No-Sew hems & seams
  • Add or repair zippers, pockets, etc.
  • Apply lace, ribbon & embellishments
  • Durable enough to use with paper, cardboard, wood, glass, etc!



Tips for Using Steam-A-Seam 2 with Wool

To use Steam-A-Seam 2 or Lite Steam-A-Seam 2 with wool, or any dense and sensitive material, you need to iron press both the front and back of your design. If available, using a steam iron is recommended.  Since the “wool” iron setting is a low temperature, you must iron press for a longer amount of time, until the Steam-A-Seam webbing is properly fused. Please use caution as it is possible to burn wool fibers – do not iron press in one area for too long. Press for 45+ seconds and let it set to cool.